G Type Aluminium Wound Finned Tube, OD 16-63 MM
Aluminum G Wound Type Finned Tube
Bare tube general material: Aluminum, Copper, Alloy, Carbon Steel, Stainless Steel.
Bare tube OD: 16-63mm.
Fin general material: Copper, Aluminum.
Fin pitch: 2.1-5.0mm.
Fin height: <17mm.
Fin thickness: 0.4mm.
G fin tube consists of aluminum fin strip that is mechanically embedded into the wall of the tube. The embedding process is controlled by tooling that first plows a groove into the tubes outside diameter, then guides the base of the fin into the groove and finally locks the fin in place by rolling the groove closed on the base of the fin. This ensures that maximum heat transfer is maintained at high tube metal temperature 400°C.
Bare tube general material: Aluminum, Copper, Alloy, Carbon Steel, Stainless Steel.
Bare tube OD: 16-63mm.
Fin general material: Copper, Aluminum.
Fin pitch: 2.1-5.0mm.
Fin height: <17mm.
Fin thickness: 0.4mm.
G fin tube consists of aluminum fin strip that is mechanically embedded into the wall of the tube. The embedding process is controlled by tooling that first plows a groove into the tubes outside diameter, then guides the base of the fin into the groove and finally locks the fin in place by rolling the groove closed on the base of the fin. This ensures that maximum heat transfer is maintained at high tube metal temperature 400°C.
Send your message to this supplier
Related Articles from the Supplier
Related Articles from China Manufacturers
Use and Difference of R and G Pipe Threads
- Dec 14, 2024
Cavitation In Control Valves - E.G. Butterfly Valve
- Nov 06, 2017
Overview of Pipe Threads: R and G Types
- Apr 29, 2025
Related Products Mentioned in the Article
Supplier Website
Source: https://www.pipessteel.com/g-type-aluminium-wound-finned-tube-od-16-63-mm.html