G Type Aluminium Wound Finned Tube, OD 16-63 MM
Key Specifications / Features
G Type Aluminium Wound Finned Tube Manufacturer: G Type Wound Finned Tube, Aluminium, OD 16-63 MM, Pitch 2.1-5 MM, Height <17 MM, Thickness 0.4 MM.
Detail Information
Aluminum G Wound Type Finned Tube
Bare tube general material: Aluminum, Copper, Alloy, Carbon Steel, Stainless Steel.
Bare tube OD: 16-63mm.
Fin general material: Copper, Aluminum.
Fin pitch: 2.1-5.0mm.
Fin height: <17mm.
Fin thickness: 0.4mm.
G fin tube consists of aluminum fin strip that is mechanically embedded into the wall of the tube. The embedding process is controlled by tooling that first plows a groove into the tubes outside diameter, then guides the base of the fin into the groove and finally locks the fin in place by rolling the groove closed on the base of the fin. This ensures that maximum heat transfer is maintained at high tube metal temperature 400°C.
Bare tube general material: Aluminum, Copper, Alloy, Carbon Steel, Stainless Steel.
Bare tube OD: 16-63mm.
Fin general material: Copper, Aluminum.
Fin pitch: 2.1-5.0mm.
Fin height: <17mm.
Fin thickness: 0.4mm.
G fin tube consists of aluminum fin strip that is mechanically embedded into the wall of the tube. The embedding process is controlled by tooling that first plows a groove into the tubes outside diameter, then guides the base of the fin into the groove and finally locks the fin in place by rolling the groove closed on the base of the fin. This ensures that maximum heat transfer is maintained at high tube metal temperature 400°C.
da***********01
2368 article(s)
Comments
Leave a Comment