ASTM A105 Carbon Steel Slip-on Flanges, FF, RF, DN10-2000

Jan 01, 1970

Carbon steel slip-on flanges are widely utilized in industry. The flanges can take place of lap joint flanges. Slip-on flanges can save space, reducing the weight. Joint part between flanges and pipes cannot take place, having good sealing. Reducing diameter of sealing part decreases cross section of sealing face so the flanges have small dimensions. Otherwise, gasket is take place of by sealing ring to ensure matching between sealing faces. Hence, only low pressure can compresses sealing face. With falling of pressure, sizes and quantities of bolt are also reduced. Slip-on flanges are lighter than conventional flanges by 70%~80%.

Materials

Carbon steel: ASTM A105, A350 LF1, LF2, A694 F42, F46, F48

Nominal diameter: DN10-2000mm

Nominal pressure: Class 150-2500LB

Standard: ASME B16.47, ANSI B16.28

Flanging face: raised face (RF), flat face (FF)

Dimensions

Flanging face	Nominal Pressure
Flanging face	150LB	300LB	600LB	900LB	1500LB	2500LB
Raised face	DN10-600				DN15-3000	DN10-2000
Flat face	DN10-600				DN15-3000	DN10-2000

Send your message to this supplier

Name *

Company

Email *

Phone

Message *

topper

www.chinatopper.com
Address: Xiamen
Phone: 86-592-5819200
Business Type: Trading, Industry & Trading, Manufacturer,

Supplier Website

Source: https://www.chinavalvesflange.com/astm-a105-carbon-steel-slip-on-flanges-ff-rf-dn10-2000.html