DIN 3352, EN 10434 Gate Valve, DIN GS-C25, DN800, PN16, RF
Standards
Design and Manufacture: DIN 3352; EN 10434.
Face to Face: DIN 3202; EN 558.
Flanged Ends: DIN 2543-2545; EN 1092.
Inspection and Test: DIN 3230; EN 12266.
Pressure and Temperature: DIN 2401.
Size: DN800, 32 Inch.
Pressure Rating: PN16, Class 150 LB.
Body/Bonnet: DIN GS-C25.
Wedge: DIN GS-C25.
Seat: ASTM A105 + 13Cr.
Bolted bonnet (BB) design.
Full port or reduced port design.
Back seal design.
Non-rising stem design.
Renewable seat or welding seat.
Special Request: locking device (interlock), position indicator, limit switch.
Extended bonnet for cryogenic & underground service is available.
Design and Manufacture: DIN 3352; EN 10434.
Face to Face: DIN 3202; EN 558.
Flanged Ends: DIN 2543-2545; EN 1092.
Inspection and Test: DIN 3230; EN 12266.
Pressure and Temperature: DIN 2401.
Size: DN800, 32 Inch.
Pressure Rating: PN16, Class 150 LB.
Body/Bonnet: DIN GS-C25.
Wedge: DIN GS-C25.
Seat: ASTM A105 + 13Cr.
Bolted bonnet (BB) design.
Full port or reduced port design.
Back seal design.
Non-rising stem design.
Renewable seat or welding seat.
Special Request: locking device (interlock), position indicator, limit switch.
Extended bonnet for cryogenic & underground service is available.
Send your message to this supplier
Related Articles from the Supplier
Related Articles from China Manufacturers
DIN Small Size Globe Valve in Forging Materials
- Oct 26, 2020
DIN Gate Valves Delivered to Europe (PN40 Series)
- May 31, 2021
DIN Gate Valves Shipped to Europe (PN63 Series)
- Jun 01, 2021
DIN Gate Valves Delivered to Europe (PN100 Series)
- Jun 02, 2021
Related Products Mentioned in the Article
Supplier Website
Source: https://www.mfrsvalve.com/din-3352-en-10434-gate-valve-din-gs-c25-dn800-pn16-rf.html