Cable Length Tester NF-868B

Oct 25, 2012

Features:
♦Capable to test open circuit, short , cross connection, reverseconnection and pairing connection and broken wire positioning .
♦To make a accurate determination of open circuit position (left, rightor middle).
♦To quickly find the target wire or cable among the plenty of wires.
♦To perform crosstalk test on network cable for solving the potentialproblem of slow speed.
♦Capable to measure length of network cable, coaxial cable, telephonecable and USB cable with three method (M-S, M-R and OPEN).
♦To perform cable tacking on exchanger or Router with power-on.
♦Utomatic delay power on-off and backlight function.
♦Self test function shall automatically make compensation due tochange of battery level and ambient temperature.
Specification:

Overall dimensions	Main tester: 185×80×32mm Receiver:218×46×29mm Remote identifier: 107×30×24mm
Display	Dot matrix 128×64 (Effective visible area 56×40mm)
Power supply	Main tester receiver: 9V compound tandem cell
Testing cable types	STP/UTP 5E, 6E network , telephone , coaxial ,USB signal
Testing cable types	cable and common metal wires connected with alligator clips
Operating environment temperature/ humidity	-10 ~ +60 / 20% ~ 70%
Testing device interface	Main unit: RJ45 (M), RJ45 (S), loop interface, RJ11, BNC
	connector,USB B-type interface.Remote identifier: RJ45,
	RJ11, BNC connector, USB A-type interface
Length measurement	Range: 1-1200m; Calibration precision:2% (+/-0.5m,or+/-1.5 feet); (calibration; cable >10m) measurement precision:3% ((+/-0.5m,or +/-1.5 feet); (AMP, CAT 5E, 6E cable material) Display unit: meter, inch, yard;