Manual Flange Pinch Valve, Aluminum Alloy, DN50-DN300, PN10

Product Name: Manual Flange Pinch Valve
Type: Flange Connection Rubber Sleeve PN10 Aluminum Alloy Pinch Valve
Model Number: GJ41X-10L
Body Material: Aluminum Alloy
Sleeve Material: Natural Rubber, EPDM, Neoprene (replaceable)
Size Range: DN50-DN300
Pressure Rating: PN6, PN10
Operation: Handwheel Manual
Connection Type: Flange
Media Handled: Slurry, mud, powder, grit, granular substance, corrosive fluid
Application: Mining, mineral processing, wastewater treatment, chemical industry, cement, paper-making

Main Features 
1. Full flow bore, no obstruction, no material buildup 
2. Replaceable rubber sleeve, easy maintenance & low cost 
3. Zero leakage, tight shut-off; good for slurry, powder, grit, and corrosive fluid 
4. Lightweight aluminum alloy body, flange connection 
5. Multiple rubber sleeve options: natural rubber, EPDM, neoprene for different media 
6. Handwheel manual operation, simple and reliable
7. Sizes: DN50 DN300, Pressure rating PN6, PN10

Application: Widely used in mining, mineral processing, wastewater treatment, chemical industry, cement, paper making for controlling slurry, mud, dust, granular and corrosive media.

Description: Manual flange pinch valve GJ41X 10L with aluminum alloy body and replaceable rubber sleeve. Zero leakage shut-off for slurry, mud, powder, and corrosive media. Full-bore design, no medium blockage. Wide size range DN50 DN300, pressure PN6/PN10. Suitable for mining, chemical, and wastewater treatment industries.