Válvula de control estabilizadora de presión ajustable tipo diafragma

Descripción de la válvula:
Válvula estabilizadora de presión ajustable tipo diafragma, BRIDA
Diseño: CJ/T 167.
Cuerpo: ASTM A351 CF8
Tamaño nominal: DN100.
Clase nominal: PN16.
Conexión final: brida RF.
Cara a cara: GB/T 12221, CJ/T 167
Prueba e inspección: GB/T 13927.

Gama de productos:
Material del cuerpo: CF8, QT450.
Diámetro normal: DN50 - DN1000
Conexión final: Bridada.
Rango de presión: PN16 - PN25.
Temperatura de trabajo: ≤80℃.

Parámetros técnicos y características

Product	Diaphragm Type Adjustable Pressure Stabilizing Valve
Nominal diameter	DN50 - DN1000.
Design pressure	PN16-PN25.
Design standard	CJ/T167.
Face to face	GB/T12221.
Connection end	Flange.
Test standard	GB/T13927.
Application	Water, chemical properties medium similar to water.

Diaphragm Type Adjustable Pressure Stabilizing Valve

Diaphragm-type adjustable pressure-reducing and stabilizing valve is a special valve installed on the piping of the water supply and drainage system of high-rise buildings to reduce the inlet pressure to a certain outlet pressure. The outlet pressure does not change due to changes in inlet pressure and flow rate, and a self-cleaning filter is installed at the inlet of the valve control system. Using fluid characteristics, the specific gravity is larger, and suspended particles with larger diameters will not enter the control system. The circulation of the system is unobstructed so that the valve can operate safely and reliably. The system has sensitive action and a long service life