Resilient Seat Gate Valve
Key Specifications / Features
Detail Information
AWWA, DIN 3352 F4, DIN 3352 F5, BS 5163, BS 5150 Resilient Seated Gate Valve, Flanged Ends, Non-Rising Stem, PN10, PN16.
1) Product information: The gate valves supplied are mainly used for adjusting water, Steam, oil, gas, and natural gas in chemical industries.
2) Standards: AWWA, DIN 3352 F4, DIN 3352 F5, BS 5163, BS 5150.
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends.
Type, PVC socket.
4) Material:
A) Body: Ductile iron.
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber.
C) Wedge nut: Brass.
D) Stem: Stainless steel, BS 970 431S29 or DIN 17440 X 20Cr13.
E) Gasket: NBR.
F) Bonnet: Ductile iron.
G) O-ring: NBR.
H) Washer: Carbon steel or stainless steel.
5) Size: 50-600mm, 2 Inch-24 Inch.
6) Pressure rate: PN10, PN16.
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside.
B) Coating as per customers' requirement.
1) Product information: The gate valves supplied are mainly used for adjusting water, Steam, oil, gas, and natural gas in chemical industries.
2) Standards: AWWA, DIN 3352 F4, DIN 3352 F5, BS 5163, BS 5150.
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends.
Type, PVC socket.
4) Material:
A) Body: Ductile iron.
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber.
C) Wedge nut: Brass.
D) Stem: Stainless steel, BS 970 431S29 or DIN 17440 X 20Cr13.
E) Gasket: NBR.
F) Bonnet: Ductile iron.
G) O-ring: NBR.
H) Washer: Carbon steel or stainless steel.
5) Size: 50-600mm, 2 Inch-24 Inch.
6) Pressure rate: PN10, PN16.
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside.
B) Coating as per customers' requirement.
Similar Products
Related Searches
Products you might also like
Send your message to this supplier
Categories
Supplier Website
Source: https://www.uvalve.cn/resilient-seat-gate-valve.html