Class 150 Y Strainer
Key Specifications / Features
Detail Information
ANSI Class 150 Flange Y-type strainer.
Y-type strainer is a indispensable device in transmission pipeline system, usually installed inlet in pressure reducing valve, pressure relief valve, water valve and other device, the valve is used to remove impurities in order to protect the valve and equipment in normal use.
Size: 1/2 Inch-20 Inch.
Material: ASTM A351 CF8M, ASTM A351 CF8, ASTM A216 WCB.
Pressure: CLASS 150, 300, 600, 900 LB.
Connection: Flange.
FLANGE DIMENSION: ANSI B16.5.
FACE TO FACE: ANSI B16.5.
Temperature range: ≤250℃.
Applicable Media: water, oil.
Advantage:
1. Strong body material can't be broken by transfer and install.
2. Streamline design for low pressure drop. Epoxy coating prevents corrosion and rust.
3. There is pressure tap leave on the bonnet, which can install pressure measuring device to test pipe pressure.
4. It can supply different precision filters according to different customer's request. The filter is easy to clean.
5. Dimension of inner cavity inlet is 1.2-1.3 time larger than the size and the screen length is 1.5 time than the normal, which improves flow and Extends cleaning cycle.
6. The screen is installed by 45 degree and the mesh area is 3-4 times larger than nominal diameter area. The flow resistance is lower and the flow is larger.
Y-type strainer is a indispensable device in transmission pipeline system, usually installed inlet in pressure reducing valve, pressure relief valve, water valve and other device, the valve is used to remove impurities in order to protect the valve and equipment in normal use.
Size: 1/2 Inch-20 Inch.
Material: ASTM A351 CF8M, ASTM A351 CF8, ASTM A216 WCB.
Pressure: CLASS 150, 300, 600, 900 LB.
Connection: Flange.
FLANGE DIMENSION: ANSI B16.5.
FACE TO FACE: ANSI B16.5.
Temperature range: ≤250℃.
Applicable Media: water, oil.
Advantage:
1. Strong body material can't be broken by transfer and install.
2. Streamline design for low pressure drop. Epoxy coating prevents corrosion and rust.
3. There is pressure tap leave on the bonnet, which can install pressure measuring device to test pipe pressure.
4. It can supply different precision filters according to different customer's request. The filter is easy to clean.
5. Dimension of inner cavity inlet is 1.2-1.3 time larger than the size and the screen length is 1.5 time than the normal, which improves flow and Extends cleaning cycle.
6. The screen is installed by 45 degree and the mesh area is 3-4 times larger than nominal diameter area. The flow resistance is lower and the flow is larger.
Similar Products
Related Searches
Products you might also like
Send your message to this supplier
Categories
Supplier Website
Source: https://www.uvalve.cn/class-150-y-strainer.html