Wrinkle Extruded Finned Tubes, Aluminum or Copper Fin
Key Specifications / Features
Wrinkle Finned Tubes Supplier: Wrinkle Extruded Finned Tubes, Aluminum or Copper Fin, Fin Thickness 0.3-0.8 MM, Fin Height 0.5-0.75 Inch.
Detail Information
Wrinkle Finned Tube For Shell And Tube Exchanger
Fin Materials: Aluminum, copper.
Tube Materials: No limits.
Fin Thickness: Min: 300 μ, Max: 800μ
Fin Height: 0.5 Inch to 0.75 Inch.
The Wrinkle Fin attachment is a surface variation to the Edge Tension fin tube. This enhancements breaks up the air to enhance heat transfer. It uses symmetrical waves in the radial surface of the fin as it contacts the tube. The fins are tack welded to the tube at each end of the fin section to ensure contact. The fins are also thicker sheet metal, typically 0.030" to 0.060" thick, which makes them very rubust. Wrinkle Fin enhancement is commonly used in heavy duty applications and rough environments.
Fin Materials: Aluminum, copper.
Tube Materials: No limits.
Fin Thickness: Min: 300 μ, Max: 800μ
Fin Height: 0.5 Inch to 0.75 Inch.
The Wrinkle Fin attachment is a surface variation to the Edge Tension fin tube. This enhancements breaks up the air to enhance heat transfer. It uses symmetrical waves in the radial surface of the fin as it contacts the tube. The fins are tack welded to the tube at each end of the fin section to ensure contact. The fins are also thicker sheet metal, typically 0.030" to 0.060" thick, which makes them very rubust. Wrinkle Fin enhancement is commonly used in heavy duty applications and rough environments.
da***********01
2368 article(s)
Comments
Leave a Comment