Packaging components
1)1*Braided Metal Hose
2)1*Brass T-adapter
3)2*Fixing bolts
4)1*Rubber Washer
5)1*Installation Instructions
Installation for toilet seat cover
1) Insert the bolts with hinges into the toilet mounting holes.
2) Adjust the seat cover according to the position of the toilet bowl to correspond.
3) Screw the nut with a washer under the toilet bowl, then tighten.
4) Close the hinge covers.
Connecting water hose
Step 1:
Shut off the water supply valve on the wall. Then drain all the water in the toilet tank.
Step 2:
Inspect accessories, make sure T-Adapter has the black rubber washer (The black rubber washer must be placed on the T-Adapter adapter).
Step 3:
1. Connect the T-Adapter to the toilet tank water inlet. Hand tighten.
2.Connect the other end of the metal braided metal hose to the T-Adapter. Hand tighten.
3.Connect the existing water supply flexible hose to the other end of the T-Adapter. Hand tighten.
Step 4:
Connect one end of the flexible braided metal hose to the water inlet of the bidet. Hand tighten.
Open the water supply valve.
Check connections for water leaks.
Tighten connections where there is a leak until leak stops.