Non-rising Stem Slab Gate Valve, API 6D, NPS 2-48 Inch
Model Number: LV 22 CGV 04
Key Specifications / Features
Non-rising Stem Slab Gate Valve Supplier: Slab Gate Valves, Non-rising Stem, API 6D, 2-48 Inch, 150-2500 LB, DBB, Non Through Conduit, RF, RTJ, BW.
Detail Information
Non-rising Stem Slab Gate Valve (NPS 2-48 Inch)
Design standard: API 6D
Body material: Carbon steel, Stainless steel, duplex stainless steel, Alloy steel, Nickel alloy
Pressure range: Class 150-2500 LB
Nominal diameter: NPS 2-48 Inch
Mode of operation: Hand wheel, Gear box, Electric, Pneumatic, hydraulic device, Pneumatic-hydraulic device
End connection: RF, RTJ, BW
Stem: Non-rising Stem
Features:
1. Operating torque is smaller than normal gate valve
2. Double block and bleed seat design
3. Bidirectional seals, no limitation on the flow direction
4. When valve is in full open position, seat surfaces are outside flow stream that always in full contact with gate that can protect seat surfaces, and suitable for pigging pipeline
5. Non-rising stem design can be chosen
6. Spring loaded packing can be chosen
7. Normally open type or normally close type with through conduit design
8. Non through conduit design is also available as per customer request
9. Low emission packing can be chosen according to ISO 15848 requirements
10. Stem extended design can be chosen
Design standard: API 6D
Body material: Carbon steel, Stainless steel, duplex stainless steel, Alloy steel, Nickel alloy
Pressure range: Class 150-2500 LB
Nominal diameter: NPS 2-48 Inch
Mode of operation: Hand wheel, Gear box, Electric, Pneumatic, hydraulic device, Pneumatic-hydraulic device
End connection: RF, RTJ, BW
Stem: Non-rising Stem
Features:
1. Operating torque is smaller than normal gate valve
2. Double block and bleed seat design
3. Bidirectional seals, no limitation on the flow direction
4. When valve is in full open position, seat surfaces are outside flow stream that always in full contact with gate that can protect seat surfaces, and suitable for pigging pipeline
5. Non-rising stem design can be chosen
6. Spring loaded packing can be chosen
7. Normally open type or normally close type with through conduit design
8. Non through conduit design is also available as per customer request
9. Low emission packing can be chosen according to ISO 15848 requirements
10. Stem extended design can be chosen
Supplier Information
XIAMEN LANDEE INDUSTRIES CO., LTD.
Verified Supplier
NO. 321 JIAHE ROAD, XIAMEN, P.R.CHINA 361012
Est. 1994
Certifications:
ISO 9001
la*******01
14463 article(s)
Comments
Leave a Comment