Welcome to China B2B Marketplace
Back to Supplier News
XIAMEN QISHINE IMP.& EXP. CO., LTD.

Small Bolts and Nuts Matter

Nov 18, 2026
0 views
Small Bolts and Nuts Matter
On this page

Special Rectification of Safety for Dangerous Goods Carried by Ships: Small Bolts and Nuts Pose Big Hazards. How Can Pipeline Connections Be "Just Made Up"?

Improve, enhance and establish a sound control mechanism

The safety of ships carrying dangerous goods is crucial to the overall situation of water traffic safety! When ships transport oil, dangerous chemicals, flammable, explosive, toxic, and other dangerous goods, in the event of a fire, explosion, or major leakage accident, it could lead to severe damage to the ship, environmental catastrophes, and significant casualties.

Since April 26, 2024, the three-year campaign launched nationwide by the Maritime Safety Administration of the Ministry of Transport to enhance the safety of ships carrying dangerous goods has entered a new phase of comprehensive improvement. It has placed greater emphasis on the whole-chain safety management of the "one thing" concerning the waterway transportation of dangerous goods. The campaign continues to strengthen the improvement of the safety management responsibility system, working mechanisms, and institutional standards. It aims to establish a normalized mechanism for effective risk identification and control, as well as timely investigation and rectification of hidden dangers. The focus is on eliminating illegal activities and elevating the intrinsic safety level of dangerous goods carried by ships to a new height, thereby contributing to the establishment of a new pattern of integrated waterway traffic safety governance.

I. Introduction

Ship oil and gas recovery operation refers to the process of collecting oil and gas emitted by ships, transporting them through pipelines to oil and gas recovery equipment for disposal, and then reducing the oil and gas back to oil products for recycling and reuse. Oil and gas recovery serves a dual purpose of energy conservation, emission reduction, and environmental protection.

Amidst the current challenges of air pollution prevention, tight energy supply, and frequent oil terminal operations, the importance of oil and gas recovery has been increasingly recognized. However, some oil tanker operators lack sufficient attention to the oil and gas recovery system, leading to issues such as non-standard operations and perfunctory work during the connection of oil and gas recovery pipelines, which cannot effectively ensure the airtightness of the pipelines. This not only causes oil and gas leakage, polluting the atmospheric environment, but also may lead to the accumulation of oil and gas, creating a flammable and explosive hazardous environment. This is highly prone to safety accidents such as fires and explosions, seriously endangering the safety of ships, personnel, and waters.

II. Typical Cases

One day, law enforcement personnel from the Lianyungang Maritime Safety Administration discovered a strong odor of oil and gas at the operation site of the tanker "J-Ship" during an on-site inspection, which was engaged in diesel loading operations. Upon detailed inspection, it was found that only four bolts and nuts were installed on the flange joint of the oil and gas recovery pipeline of the ship, with two bolt holes remaining uninstalled. Furthermore, the four installed bolts and nuts had different sizes, which did not match the flange joint and could not effectively ensure the airtightness of the joint.

Upon further investigation, the crew admitted that during the ship-to-shore oil and gas recovery pipeline connection operation, they did not prepare sufficient bolts of matching sizes. Consequently, both the ship and shore sides temporarily mixed and used a total of four bolts and nuts of two different models to "make up the number". This behavior directly resulted in the flange connection not being tight, with obvious gaps at the connection point, leading to continuous leakage of oil and gas from the flange joint area.

Two bolts and nuts at the flange joint are not installed, and the remaining four bolts and nuts are of varying lengths and mismatched sizes.

Maritime law enforcement personnel, using flammable gas detectors, discovered a certain concentration of oil and gas accumulation in the joint area of the oil and gas recovery pipeline amidships. If this area encounters an ignition source such as open flames or static electricity, it is extremely prone to cause fire and explosion accidents, resulting in shipwrecks, casualties, water pollution, damage to dock facilities, and significant property losses, with dire consequences. The law enforcement personnel ordered the vessel to immediately stop operations, eliminate potential safety hazards, and initiated an investigation into the illegal act.

Law enforcement personnel inspect the manifold area of the ship.

III. Relevant Requirements

1.Article 47, Paragraph 2 of the "Law of the People's Republic of China on the Prevention and Control of Air Pollution" stipulates that oil and gas storage facilities, gas stations, crude oil and refined oil terminals, crude oil and refined oil transport ships, tank trucks, gas tank trucks, etc., shall be equipped with oil and gas recovery devices in accordance with relevant national regulations and shall be maintained in normal use.

2. According to Article 5.1.5 of the "Requirements for Safe Operation of Oil Tankers in Port" (GB18434-2022), when connecting, dismantling, or assembling the oil transfer arm or hose, the responsible personnel shall ensure the airtightness of the connection and the safety of the equipment;

5.3.2.8 stipulates that during oil and gas recovery operations, the provisions of 5.1, 5.2, 5.3, 5.4, 6.1, 6.2, and 6.3 in JT/T 1346-2020 should be adhered to.

Section 5 of the Technical Specification for Safety Technical Requirements for Ship Oil and Gas Recovery (JT/T 1346-2020) issued by the Ministry of Transport stipulates that the ship-to-shore oil and gas recovery connection joints and flanges shall comply with the requirements of the "Recommendations for Oil Tankers and Chemical Tankers' Manifolds and Related Equipment" and be arranged as specified. The connecting hoses shall be wear-resistant, kink-resistant, and maintain electrical continuity, and isolation valves that can be manually operated and clearly display the open and closed states shall be installed at the joints. Before operation, a ship-to-shore safety checklist shall be developed and implemented to conduct a comprehensive inspection of the oil and gas recovery facilities, and the system can only be started for operation after meeting the requirements.

IV. Case Warning

The connection of oil and gas recovery pipelines may seem like a simple operational step, but it is actually a crucial line of defense against air pollution and the risks of fire and explosion.

1.Both the ship and the shore must enhance their safety awareness, strictly fulfill their primary responsibility for safe production, and pay attention to every small safety aspect.

2. Both the ship and the shore parties must strengthen the training of relevant operating personnel, enhance their safety awareness, improve their safe operation capabilities and levels, and ensure that each link is operated in compliance with regulations.

3.​ Both the ship and the shore must strictly adhere to the regulatory requirements in conducting pipeline docking operations, ensuring sufficient bolt quantity, matching dimensions, and secure installation. Any "making do" operations or unauthorized procedures must be resolutely prohibited. Additionally, during the operation, it is essential to strengthen patrols and gas detection at the ship-shore operation interface, monitor changes in oil and gas concentration in real time, and promptly close doors, windows, and air intakes in the living area that may lead to oil and gas accumulation, to prevent any potential safety risks arising from this.

Comments

Leave a Comment

Related Supplier News