Shanghai DE Industrial Co., LTD.
Connetion Methods of Universal Joints
Feb 28, 2015
1926 views
On this page
The connection methods between fork flanges and connection flanges.
10.9 grade or 12.9 grade hexagon bolts or cylinder bolts, 10 grade or 8 grade self-locking nuts.
Inserting bolts from the ends of fitting flanges. For those without flange connections, studs can be used in this case.
Using torque spanners to screw up the bolts to the biggest extent. The biggest toque can not surpass 90% of plastic limits of bolting materials. Moreover, bolts must be oiled.
Other connection methods with fittings of universal joints.
Apart from the above mentioned basic structure, there are other connection methods of universal joints. Here are some structure offered by customers.
Pawn Type Connection Face Tooth Connection
Other structure of universal joints’ connecting sets.
For more information concerning universal joints, please refer to the following articles:
Structure and Application of Universal Joints
Structural Types of Universal Joints
Model Selection of Universal Joints
Carrying and Storage of Universal Joints
Installation and Lubrication of Universal Joints
Usage and Maintenance of Universal Joints
Basic Info for Model Selection of Universal JointsStructural Types of Universal Joints
Model Selection of Universal Joints
Carrying and Storage of Universal Joints
Installation and Lubrication of Universal Joints
Usage and Maintenance of Universal Joints